Calrec Zeta, Operator'S Manual

Page: 88 / 144

88 Zeta
Digital Broadcast Production Console
external meter InputS
the input sources for external meters
can be patched here in the same
way that channel inputs are patched.
there can be up to 32 external meter
inputs, which are mono, stereo or 5.1
surround.
External input ports are selected from the
available lists on the left of the screen.
Different lists are accessed using the
selection buttons. The sources can be
viewed as pairs (for patching to stereo or
surround paths), individual (for patching to
mono paths), or individual with the actual
rack number, card slot and input shown (for
diagnostic purposes).
Assignment is made by selecting an input
source and a meter, and selecting Patch.
Save Options to Disk and Flash
The Options screens are used to preset
the system to the required settings. These
settings are not stored in the individual
console memories but are saved and
loaded separately. Changes to options
take effect as soon as they are made, but,
if they are not saved, the next time the
desk boots up the options will revert to
their previous settings.