Calrec Zeta, Operator'S Manual, Page: 30 / 144

30 Zeta
Digital Broadcast Production Console
this screen provides controls for
channel functions, some of which are
available on the control surface. the
right side of the screen shows the
fader paths a and B.
To make changes, select the required
fader path either from the screen or by
pressing its fader assign button, and use
the controls on the left side of the screen.
Path Type Selection
The path type for the currently assigned
fader can be selected either as a mono
or stereo channel using the mono and
stereo buttons, or as a group, using
the numbered buttons. Groups are
designated as mono or stereo in blocks of
four using the User-Busses screen.
Clearing Paths
To clear a path, select the assign button
of the path you wish to clear, and select
CLEAR PATH and then EXEC.
“Start Fader Selection” allows a number of
fader paths to be selected, either from the
screen, or by selecting their fader assign
buttons. In this way, a number of fader
paths can be cleared in one operation.
Multiple fader selection can also be used
to allocate a path type to several paths at
once. The multiple fader selection can be
cleared using “Clear Selection”.
Move Path and Move Strip
In addition to the controls on the control
surface, paths can be moved or swapped
from one fader to another, using the
controls on this screen.
Select the required path, and select
MOVE PATH (the assign button will
uSer-CHan SCreen
flash). Then select the destination fader
path, and select EXEC (Move). The two
paths will swap over, and any Wild control
assignments will move with them.
MOVE STRIP moves the whole fader
strip to a different fader. This means that
the A and B paths including any Wild
Assignments will move to the selected
destination fader strip.
Fader Bargraph Assignment
Buttons I/P, DIR O/P, DYN and OFF on
this screen will set the function of the fader
bargraph on the currently assigned fader.
If ALL is pressed first (flashes) all fader
bargraphs will be set to the selected function.