![background image](http://html1.mh-extra.com/html/calimet/cm3/cm3_installation-and-owners-manual_3055112038.webp)
Description
Task
Inspect guide rollers, fasteners, v-track, posts, and
other parts for wear, damage or misalignment.
Lubricate if necessary. There should be no squeaking.
Check every:
1 month
1 month
Place your hand over the photoscell sensor infrared
beam when the gate is closing. The gate must stop
and reverse.
Two signs should be installed. One is visible to
people on the outside of the gate, and one is visible
to people on the inside of the gate.
1 month
Turn off power and step down on the foot pedal
to move it to the right. Manually push the gate
to ensure that it can fully open and close.
2 months
Step on foot pedal and move it to the right.
Manually push the gate with your hands. Gate
should move freely and easily with little to no
resistance.
Gate should not collide with anything.
2 months
6 months
Electrical
1 year
Check to make sure chain is lubricated. Check to
make sure it's not too tight, and make sure there
isn't excessive slack. Check for wear or damage.
Check wiring connections to make sure none are
loose or damaged.
Check all gate operator accessories including
remotes, loop detectors, keypad, etc. to make sure
they are all operating properly.
1 year
Battery
4 years
Chassis Sleeve
Anchors
1 year
Gate
Photocell Sensor
check
Safety Edge
Warning Signs
Emergency Release
Free Movement
Check
Chain
Force
Accessories
Check to make sure the anchors are not loose or
damaged.
Replace battery.
6 months
Gate should reverse when it comes in contact
with object. Test both open and close ERD force.
Maintenance
36
1 month
If using safety edges, check the battery. Replace
batteries with 3V CR2450 coin batteries (2
quantities) every 3 years.
Summary of Contents for CM3
Page 41: ......