![background image](http://html1.mh-extra.com/html/calimet/cm3/cm3_installation-and-owners-manual_3055112019.webp)
The limit switches control the position of where the gate opens and closes.
1. Push and hold the limit lock plate outwards.
2. Follow the instructions below based on which direction your gate opens when viewed from the inside.
If your gate opens to left:
Open Limit Position: To make your gate position open further, turn Limit Nut A counterclockwise. To
make the gate position open less, turn Limit Nut A clockwise.
Close Limit Position: To make your gate close further, turn limit Nut B counterclockwise. To make the
gate close less, turn Limit Nut B clockwise.
If your gate opens to Right:
Open Limit Position: To make your gate position open further, turn Limit Nut B counterclockwise. To
make the gate position open less, turn Limit Nut B clockwise.
Close Limit Position: To make your gate close further, turn limit Nut A counterclockwise. To make the
gate close less, turn Limit Nut A clockwise.
3. When finished, place the limit lock plate back into the grooves of both limit nuts.
Limit Switch
Limit Nut A
Limit Lock Plate
Limit Switch
Limit Nut B
Clockwise
Counter Clockwise
Step 7: Set the Gate Travel Limits
17
CLOSE STOP OPEN
TIP
:
Use the OPEN, CLOSE, STOP buttons on the circuit board for efficient
positioning. Press the STOP button before the gate hits the wall
or post
.
The gate should not touch the wall or post. The gate's close position
should stop about 1/2" to
3
" inches before it hits the wall
or post
.
Summary of Contents for CM3
Page 41: ......