![background image](http://html1.mh-extra.com/html/calimet/cm3/cm3_installation-and-owners-manual_3055112013.webp)
Top View
Correct
✓
Incorrect
✖
If installing from the rear position, follow these instructions. Move a idler pulley on the gate
operator to the center. Route the chain and bracket like the image below. This requires an
additional idler pulley to be installed near the gate.
Incorrect
✖
Incorrect
✖
Incorrect
✖
Step 3: Install the Bracket and Chain
11
Figure F
Chain Sag - allow 1
inch of sag (bend)
for every 10 feet of
chain.
Correct Chain
Position
Side View
Rear Gate Installation
Correct
✓
Summary of Contents for CM3
Page 41: ......