User and Programming Manual - Rev N
10 SCPI Command Reference
Where appropriate, related commands or queries are included. These are listed because
they are either directly related by function, or because reading about them will clarify or
enhance your understanding of the original command or query.
This chapter is organized as follows:
•
Subsystem commands, arranged by subsystem
•
IEEE 488.2 common commands
10.1 Subsystem Commands
Subsystem commands are specific to AC source functions. They can be a single command
or a group of commands. The groups are comprised of commands that extend one or more
levels below the root. The description of common commands follows the description of the
subsystem commands.
The subsystem command groups are listed in alphabetical order and the commands within
each subsystem are grouped alphabetically under the subsystem. Commands followed by a
question mark (?) take only the query form. When commands take both the command and
query form, this is noted in the syntax descriptions.
82 April
2007
2001RP
Summary of Contents for 2001RP
