California Instruments 2001RP, User And Programming Manual

Page: 103 / 130

User and Programming Manual - Rev N
10.5 Output Subsystem
This subsystem controls the main output function of the RP Series source.
Subsystem Syntax
OUTPut
[:RELay] Opens or closes the output relay.
DROP Drops the output voltage for a specified amount of time or
indefinitely.
STARt:
[STATe] Enables or disables the start phase angle mode
PHASe Sets the start phase angle value in degrees.
OUTPut[:RELay]
The output of the AC source can be isolated from the unit under test by opening the output
relay. The programmed output voltage is set to zero before opening the relay and is
returned to its programmed value when closing the relay. This avoids hot switching the
output relay contacts.
Command Syntax OUTPut[:RELay] <bool>
Parameters <Bool> 0 | 1
*RST Value defined by the PONS
Examples OUTP 1
Query Syntax OUTPut?
Returned Parameters 0 | 1
Related Commands OUTP:DROP OUTP:STAR
94 April 2007 2001RP