CAKEWALK PRO AUDIO User Manual Download Page 531

Page: 531 / 604

C-13

Adv

anced Setup

Mixer

You can connect a mixer to the sound card with a setup of the following
kind:

Step 8. Start Pro Audio

When you installed Pro Audio, the default setup procedure added a
Cakewalk folder to your

Programs

menu.

Here are some other ways to start Pro Audio in Windows:

Right-click on the desktop and choose

New-Cakewalk Song

. When

the song icon appears, type a name for the song. Then double-click
the icon to start Pro Audio.

Click the Start button, point to Documents, and choose a previously
opened Pro Audio song from the menu.

To Start Pro Audio…

Click the Start button located in the lower-left corner of the
screen.

Point to Programs to see a list of available programs and folders.

Point to the Cakewalk folder to open it.

Click on Pro Audio 9.

Note:

If your mixer has busses, use them! This helps avoid feedback.

Summary of Contents for PRO AUDIO





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRO AUDIO

Reviews:

CAKEWALK PRO AUDIO, User Manual, Page: 531 / 604

Search results

Summary of Contents for PRO AUDIO

Reviews: