manualshive.com logo in svg

CAKEWALK PRO AUDIO, User Manual, Page: 520 / 604

Share
Download
CAKEWALK PRO AUDIO User Manual Download Page 520

C-2

4.

When Setup starts, a dialog box welcomes you to the Cakewalk 
Pro Audio Setup. Click Next to continue.

5.

Setup asks you to enter your name, company (if any), and serial 
number. Cakewalk uses your name as the default author and 
copyright holder of songs. These credits appear on printed scores.

6.

Choose the installation type and destination directory. By 
default, Pro Audio is installed to C:\Program Files\Cakewalk\Pro 
Audio 9. If you want to change the destination directory, click 
Browse and specify a new directory.

7.

Select a Start menu for the program. By default, Setup creates a 
new menu on the 

Start-Programs menu and names it Cakewalk. 

You can give the new menu a different name or choose an 
existing menu from the list.

8.

Setup now asks you to confirm the installation options you have 
selected. You can click Back to go back and change something, or 
click Next to proceed with the installation.

Note:

If you exit Setup without completing the installation, choose 

Start-Run

, 

type D:\AutoRun.exe (where D:\ is your CD-ROM drive), and click OK. 
This will reopen the AutoRun window, and you can click Install 
Cakewalk to start installation again.

Note:

You can use the 

File-Info

 command to change a songÕs author and 

copyright holder.

Summary of Contents for PRO AUDIO





























































































































































































































































































































































































































































































































































































































Reviews:

No comments