CAI 700 CLD Series, Operator'S Manual, Page: 63 / 202

700 CLD / O2 5-04-2017
63
Auto Calibration/Check
→ → → →
Auto Calibration/Check lets the operator select whether the analyzer actually
calibrates, or performs a check of the calibration. To access the Auto Cal/Check
menu, press from the Calibration Setup menu. The current setting is shown on the
upper-right corner of the screen.
Press to set the analyzer parameter to Calibrate. This setting will be saved and the
analyzer will return to the Calibration Setup menu. The Calibration Setup menu shows
the current setting on the right side of the screen after the ellipsis (. . .).
Example: AutoCal/Check . . . Cal.
Press to set the analyzer parameter to Check. The setting will be saved and the
analyzer will return to the Calibration Setup menu. The Calibration Setup menu shows
the current setting on the right side of the screen after the ellipsis (. . .).
Example: AutoCal/Check . . . Check.