CAI 700 CLD Series, Operator'S Manual, Page: 159 / 202

750 Manual 5-04-2017
159
APAR: Auto Calibration Tolerance Values
Command Response Description
_APAR_K0_SATK _APAR_s_z.z_y.y_x.x_w.w Auto calibration tolerance value (%):
z.z: Range 1
y.y: Range 2
x.x: Range 3
w.w: Range 4
ARAW: Raw Detector Volts
Command Response Description
_ARAW_K0 _ARAW_s_z.z_t Raw detector volts
t = Timestamp (1/10 sec.)
_ARAW_K1
_ARAW_s_z.z_t Raw detector volts, K1 for O
2
with option
t = Timestamp (1/10 sec.)
ARMU: Raw Engineering Value
Command Response Description
_ARMU_K0
_ARMU_s_z.z_t Raw engineering value before linearization,
offset and span correction for t = Timestamp
(1/10 sec.). These are the values used to calculate
the polynomial coefficients.
_ARMU_K1 _ARMU_s_z.z_t Raw engineering value before linearization,
offset and span correction for Channel 1. These
are the values used to calculate the polynomial
coefficients. Channel 1 is O
2
with option.
t = Timestamp (1/10 sec.)