700 CLD / O2
5-04-2017
147
When both HyperTerminal and the analyzer are running while connected by the null modem
cable, the analyzer will present a menu if sent a non-AK command. This menu can be ignored
and AK commands will be acted on by the analyzer. The picture below shows a sequence with
the AKON 0 command being sent to the analyzer.
Sending the analyzer characters not framed as AK commands should be prevented as the menu
could recognize these characters and cause unplanned changes in configuration.
The AK command was typed into HyperTerminal using the following keystrokes:
Hit:
Ctrl B (at the same time).
This will start the text.
Hit:
Ctrl Spacebar (at the same time).
Type:
AKON (Function).
Hit: Spacebar.
Type:
K0 (Channel #).
Hit:
Spacebar.
Hit:
Ctrl C (at the same time). This will end the text.
The analyzer will reply with numbers. If you receive ????, try sequence again.