WARNINGS / NOTES
2
WARNING
The Function Checker does not recalibrate, service or repair any C.Scope Cable Avoidance Tool,
Locator, Signal Generator or Transmitter. The Function Checker does confirm if the C.Scope product is fit for use.
WARNING
If a C.Scope Locator, Signal Generator or Transmitter fails any of the Condition Checks or
Performance Checks detailed in this manual then it should be withdrawn from service immediately and
returned to a C.Scope Authorised Service Centre.
NOTE
In order to be able to carry out Performance Checks using the Function Checker, it is necessary to be
familiar with the operation of the C.Scope equipment that is to be checked. Training is available from C.Scope
comprising the full and correct use of all C.Scope location equipment (see page 78).
WARNING
Only use the Function Checker in an area that has been scanned and found to be suitable for use,
as described on page 8 in the ‘Selecting a suitable location’ section.