BYD G3 AUTO Owner’s Manual
46
Left Information Display
z
Fuel Gauge
When power supply is at ON, this
gauge indicates remaining fuel
amount in the fuel tank.
Almost Full – all eight grids are lighted.
Almost Empty – the last grid is flashing.
Generally the fuel shall be more than 1/4
full.
In braking, accelerating and turning, the
indicator may flash quickly, which is
caused by shaking fuel in the tank.
When the fuel level is near to “E” mark
with the information screen displaying
“Please refill fuel”, you shall add fuel as
soon as possible.
On slope road or in turning, the shaking
fuel in the tank may cause the fuel
indicator flashing or “Please refill fuel”
displayed on information screen before
the normal refilling time.
z
Engine Cooling Fluid Temperature
Gauge
When power supply is at ON, this
gauge indicates the temperature of
engine cooling fluid. The engine
temperature varies with climate and
engine load.
If the main warning light is on with
“Cooling Fluid Overheated” displayed on
the right information screen, it means
the engine cooling fluid is overheated.
When the engine is overheated, you
shall stop the car to cool down the
engine.
The engine may get overheated in the
following cases:
●
Driving uphill in hot days;
●
When the car is stopped frequently in
driving, the AC device is turned on with
the engine running in idle state for a long
time.
●
When the care is used to tow a trailer.
Note
◆
Do not remove the thermostat
in the engine cooling system,
otherwise the engine may run
abnormally.
◆
When the engine is
overheated, do not continue
driving.
