BYD G3 AUTO Owner’s Manual
35
Steering Wheel Main Switch
(optional)
Under Radio mode, press “
”
and ”
” on the main switch of the
steering wheel to search for radio
channel; press “MUTE” button for mute
mode.
Outer Rearview Mirrors
Adjust the outer rearview mirrors to
an angle where you can just see side
view of the car.
Tips
●
Do not adjust rear-view mirror
in driving. It may cause wrong
operation of the car and result in
an accident.
Outer Rear-view Mirror Controller
Adjust the rear-view mirror with this
switch.
1. Selection switch – it is used to select
which rear-view mirror shall be adjusted.
Press the switch to select L (left) or R
(right).
2. Control switch – it is used to adjust
the rear-view mirror.
Press switch as per your demand.
When ignition switch is at “ACC” or “ON”,
you can adjust the mirror.
Note
If the rear-view mirror is frozen, do
not manipulate the controller or
scrape the surface of the rearview
mirror. Use a spraying deicer to
remove the ice on the surface of the
rearview mirror.
Inner Rearview Mirror
Adjust the inner rearview mirror to an
angle where you can just see the rear
of the vehicle in it.
In night driving, you can adjust the
adjusting rod toward yourself to weaken
the dazzle caused by headlights of the
following vehicle.
Daytime driving——the rod is in position
1.
At this position, reflection in the rearview
mirror has good clarity.
Night driving——the rod is in position 2.
Note that the rearview clarity may be
reduced by some extent to weaken glare
at night.
Inner rearview mirror has direction
indication function (optional), which will
activated when:
Ignition switch is on ACC/ON position.
