BYD G3 AUTO Owner’s Manual
29
Airbag Warning Indicator
Airbag system is monitored by ECU
and integrates self-diagnosis
function. Its status is indicated by
warning indicator on instrument
panel.
●
Airbag warning light will be on for 5
seconds after turning on ignition
switch, then it will goes out and
remains for over 5 seconds, which
indicates that the system is normal.
●
If the airbag is disabled by BYD
service station, the warning
indicator still functions as
described in the above procedure,
but it does not provides protection
any more.
This warning indicator is intended to
monitor airbag ECU, impact sensor, air
charging device, warning light,
connecting wire and power supply. (For
details, please refer to “Maintenance of
Indicators and Warning Buzzer” in
Section 1-5)
）
Note
If any of the following conditions,
airbag system may have trouble:
●
The indicator is not on after
turning on the ignition switch.
●
5s after the ignition switch is
turned on, the warning light won’t
go out or, after going out,
flashes and turns on again.
●
The indicator is on after turning
off the ignition switch.
●
The indicator turns on or
flashes in driving.
Tips
If any trouble with airbag system,
please send the car to BYD
service station for check and
repair. Or in case of an accident,
the airbag system can not provide
protection as designed.
Indicator for Unfastened Front
Passenger Seat Belt (optional)
If BYD G3 comes with a seat belt
warning sensor, on the 1# switch group
of central control panel on the console,
you will see an indicator for unfastened
front passenger seat belt. It works
together with the seat belt, when the
front passenger seat is occupied with
the seat belt unfastened, this indicator
will turn on with warning tone for
reminding. When the front seat belt is
fastened, this indicator turns off. This
indicator shall be off when the front
passenger seat is not occupied. If any
difference from the above description,
there is abnormality with the airbag
system.
