BYD G3 AUTO Owner’s Manual
12
3. Remove the depleted electronic
intelligent key with a flat screwdriver or
similar tools. Insert the tool into guide
groove and apply force in the direction
as shown in the figure above to remove
the battery.
Note
Do not amend the battery cover to
avoid fault.
4. Put the battery with positive terminal
(+) on the top into the battery box, then
firmly install the key cover and insert the
mechanical key into the electronic
intelligent key.
Make sure the poles of battery
are installed properly.
Do not operate battery with wet
hands, which may cause
rusting.
Do not touch or move any
component or part inside the
electronic key, other its normal
function may be affected.
Pay attention to not bending the
terminals when inserting the
battery. The battery box shall be
free of dust or oil taint.
Reinstall the key cover firmly.
After battery replacement, check
whether the electronic intelligent key
can work normally. If it still cannot work,
please contact BYD service station.
Note
Without permission, do not alter
the emission frequency,
increase the emission power
(including but not limited to
adding emission frequency
amplifiers), equip external
antenna or use other emission
antennas.
Use of the electronic intelligent
key should not produce any
harmful interference to any legal
wireless communication
services; stop use of it
immediately if any interference
is found and do not use it until
the interference has been
eliminated.
When using a micropower radio
device, it must withstandby
interference of radio services
and radiation interference from
industrial, scientific and medical
devices.
Do not use the electronic
intelligent key near aircrafts or
airports.
