BYD G3 AUTO Owner'S Manual Download Page 57

Page: 57 / 160

BYD G3 AUTO Owner’s Manual

Prompt Information Display

Display description or buzzer tone

Description

Key is not detected

If key is not detected, this information will be displayed after pressing starting switch.

Low key battery

This information prompts key battery is running low. Please change battery.

Parking braking is not released.

When vehicle speed is over 5km/h and the parking braking is not released, this

information will be displayed with buzzer warning.

Please refill fuel

When remaining fuel is low, this information will be displayed with buzzer warning.

Fault Information Display

Display description or buzzer tone

Description

Cooling fluid temperature is over high

This information will be displayed when the cooling fluid temperature is over high. Stop
the car immediately and contact BYD service station.

Low engine oil pressure

The engine oil is not sufficient. Stop driving and contact BYD service station
immediately.

Check charging system

This information indicates that there is fault with charging system. Stop the car
immediately and contact BYD service station.

Check brake system

This information indicates that brake fluid level is low or there is fault with braking
system. Stop the car immediately and contact BYD service station.

Check ABS system

This information will be displayed when there is fault with ABS or braking system.
Contact BYD service station for a check immediately.

Summary of Contents for G3 AUTO

































































































































































Search results

Summary of Contents for G3 AUTO

Reviews:

Related manuals for G3 AUTO

Brands by name

Popular brands

BYD G3 AUTO, Owner'S Manual

Search results

Summary of Contents for G3 AUTO

Reviews:

Related manuals for G3 AUTO

Brands by name

Popular brands