BYD G3 AUTO Owner’s Manual
60
3. Select the preset number (1
～
6) for saving your desired station,
press this key for 2 seconds and
then the station will be saved
under the corresponding preset
number.
4. Repeat the operations above
from 1 to 3, you can save 12 AM
radio stations and 18 FM radio
stations.
Once the frequency of radio station
is saved, simply press the
corresponding digital preset key and
you can listen to this radio station.
If storage batteries on the car are
detached or used up or fuse of radio
is taken down, the preset channel
will be cancelled.
Auto Station Scanning and Saving
(long press SCAN)
Long press SCAN for about 2
seconds, system will automatically
search the radio station with strong
signal and save them to FM1, FM2
and FM3 or AM1 and AM2.Press
auto station scanning and saving
button (SCAN), you can enable this
function. Then, “SCAN” on the
screen will flicker at the frequency of
1Hz.Altogether, 12 AM and 18 FM
radio stations can be saved under
the digital preset keys (1
～
6).Then, you
can select the preset radio station with
these digital preset keys (1~6).If you
don’t like to listen to the channel saved
through auto scanning, you can use the
digital preset key to save other
frequencies. First, search your desired
frequency by manual station selection
(TUNE), auto station selection (SEEK)
or scanning (SCAN), and then save
them under the selected digital preset
key as mentioned above.
Volume Adjustment
Bass, treble, balance and fader are
adjustable. Press the sound-effect
adjustment button (AUDIO), you can
select your desired mode. Every time
you press AUDIO button, the mode will
switch from BAS to TRE, BAL, and FAD
in order; after one circle, short press
“AUDIO” button, the interface of screen
will return to the current mode. If the
mode is changed, corresponding mode
name will be displayed on the screen
one by one.
Balance/Fader
Sound intensity of each speaker can be
adjusted by these two modes. Left &
right sound intensity can be adjusted by
Balance while front & rear sound
intensity can be adjusted by Fader.
Press AUDIO button and you can select
Balance or Fader. Turn the volume knob
and you can adjust Balance or Fader to
a satisfied level. The displayed number
is what you set currently.
Treble/Bass
By using these modes, you can adjust
the timbre to a favorite level. Press
AUDIO button and you can select treble
(TRE) or bass (BAS) mode. Turn the
volume knob and you can adjust the
timbre to a favorite level. The displayed
number is what you set currently. After
you stop using the volume knob to
adjust the mode for three seconds, the
system will get back to the current mode
automatically.
Mute
If a quiet environment is needed
temporarily, you can quickly turn off the
sound of speaker by mute button.
