BYD G3 AUTO Owner'S Manual Download Page 135

Page: 135 / 160

BYD G3 AUTO Owner’s Manual

129

Notes

◆

Remember, storage battery
and ignition coil bears high
current or high voltage. Pay
attention to short circuit caused
by accidents.

◆

If the coolant overflows, you
must wash it with water, to
avoid damaging the
components or paint finish.

◆

Do not drop any dirt or any
other things into the spark plug
hole.

◆

Do not lever up the external
electrode of spark plug at the
side of central electrode.

◆

You can only use the specified
spark plug. Using other spark
plug may damage the engine or
generate radio interference.

◆

Do not fill too much power
steering fluid, or the power
steering gear may be damaged.

◆

If the brake fluid overflows, you
must wash it with water, to
avoid damaging the
components or paint finish.

◆

Do not drive with the air filter
taken down, otherwise it may
cause excessive wear of engine
and meanwhile backfire will

cause fire in the engine
compartment.

◆

Notes: do not scratch the glass
by the wiper bracket.

◆

In closing the engine cover,
check if any tools or cloths are
left in the engine compartment.

Location of Jack

Front

Back

Summary of Contents for G3 AUTO

































































































































































Search results

Summary of Contents for G3 AUTO

Reviews:

Related manuals for G3 AUTO

Brands by name

Popular brands

BYD G3 AUTO, Owner'S Manual

Search results

Summary of Contents for G3 AUTO

Reviews:

Related manuals for G3 AUTO

Brands by name

Popular brands