background image

BYD G3 AUTO Owner’s Manual 

 

 

47

z

 

Odometer and Dual Short Mileage 
Odometer 

 

 

 

This screen displays the following 
information. 

 
1. Odometer – displays the total travel 
mileage of the car.   
2. Dual Short Mileage Odometer – 
display the travel mileage after the two 
short mileage odometers are reset to 
zero respectively.   

You can use one to calculate remaining 
fuel amount (TRIP A) and use another to 
record the mileage of each trip (TRIPB). 
3. Trip/Reset button (ODO TRIP button 
on the left) – reset the dual short 
mileage odometers and change the 
display mode.   

 

 

 

To change the display mode, press 
down and then quickly release the ODO 
TRIP button. Pressing the button 
repeatedly, the odometer will display the 
following information in cycle:  Total 
Mileage (ODO) – Short Mileage 
Odometer (TRIPA) – Short Mileage 
Odometer (TRIP B) - Total Mileage 
(ODO). 
To reset a short mileage odometer, 
switch the information displayed on the 
screen to the reading of it firstly, then 
press TRIP button for over 2 seconds 
and release the button after it is reset to 
zero.  

Tachometer  

 

 

 

Tachometer displays the engine 
speed in rpm (round per minute) by 
multiply the reading by 1000. Make 
gear shifting according to the 
tachometer reading can prevent 
engine from over speed running. 

 

 
Driving at over high engine speed will 
lead to excessive wear of the engine 
and higher fuel consumption.   
 

Note

 

Do not allow the pointer to enter 
read area, which means the 
engine may severely damaged. 

 

 

Summary of Contents for G3 AUTO

































































































































































Reviews: