BYD G3 AUTO Owner’s Manual
40
Note
To prevent the battery from over
discharge, when the engine is not
running, do not keep lights on for
long time.
High/low beam – to use high beam, turn
on the headlight and push the handle
outwards (position 1). To use low beam,
push the handle to yourself (position 2).
The blue indicator for high beam
headlight on the combination instrument
indicates that the headlights are turned
on.
High Beam Headlight Flashing (position
3) – push the handle backwards fully.
When release the handle, the headlight
will be turned off.
Turning the knob to “OFF” can also
make the high beam headlights flash.
Turn Signal Lights
To give out turn signal, push the
headlight/turn signal light handle
upwards/downwards to position 1.
The ignition switch shall be on “ON”.
After the vehicle has finished turning,
the handle will reset to its original
position automatically; but in lane
changes, you must reset it manually.
To give out lane change signal, push the
handle upwards/downwards to position
2 and hold there.
IF the green turn signal indicator on the
combination instrument flashes at a
higher speed than normal, it means front
or rear turn signal bulb is burnt out.
High Mount Brake Light
When you step on brake pedal, the light
will be turned on together with the rear
brake light, giving warning that the car is
in braking to prevent accidents.
Emergency Light
To turn on emergency light, press
down this switch.
All turn signal lights will turn on and flash.
To turn the lights off, just press this
switch.
When you had to park the car at a place
where parking may cause an accident,
you shall turn on the emergency lights to
give warning to other drivers.
Try to park the car far away from road.
When emergency lights are turned on,
switch for turn signal lights do no
function.
