BYD G3 AUTO Owner'S Manual Download Page 19 | Manualshive

Page: 19 / 160

background image

BYD G3 AUTO Owner’s Manual

13

Intelligent Access and Starting
System

This system has the following function:

●

Wireless remote control function (See

“

Wireless Remote Control

” in this

Chapter for details.)

●

Access function and starting function

(see “

Access Function and Starting

Function

” in this Chapter)

●

Steering lock function (refer to

“

Steering Lock Fuction

” in this Chapter.

●

Button Starting fuction (for details,

please see “

How to Start Engine

” in this

Chapter).

Warning

●

People with heart pacemaker and

defibrillator shall be kept away
from antenna of intelligent
access and starting system, as
electromagnetic wave may affect
normal use of these devices. For
information on position of the
antenna, please refer to “

Antenna

Position

” in this chapter.

●

Drivers with heart pacemaker and

defibrillator and people using
other medical electronic devices
shall inquire manufacturer about
interference posed by
electromagnetic wave to these
device.

Electromagnetic wave may cause
unexpected results to these
devices.

Access Function

Starting Function

«
...
17
18
19
20
21
...
»

Summary of Contents for G3 AUTO

































































































































































Reviews:

No comments

Related manuals for G3 AUTO

Brand: Hama Pages: 2

Brand: Abarth Pages: 36

Brand: FORM FIT Pages: 2

Road Ready Seat Protector

Brand: Wagan Pages: 12

Brand: Chevrolet Pages: 50

Green Motion DC 66

Brand: Eaton Pages: 18

Brand: Whipple Pages: 3

Brand: RAM Pages: 616

Brand: Nav TV Pages: 9

Brand: Honda Pages: 81

v.LOGiC Intelligent Solution V5-NTG46

Brand: Caraudio-Systems Pages: 18

Ferrari 360 Map Carbon Light

Brand: MAcarbon Pages: 4

Brand: KEKO Pages: 13

Stealth 4191F Series

Brand: Road Armor Pages: 5

Brand: RAM Pages: 330

MultiCharger 1204

Brand: DEFA Pages: 28

Brand: Steelmate Pages: 14

Brand: Fiat Pages: 284

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands