BYD G3 AUTO Owner’s Manual
19
4. Make sure the indicator is flashing
before you leave the car.
If anyone in the car unlocks the door, the
anti-theft system will be activated. So do
not leave anybody in the car.
Activate Anti-theft System
The system will give out alarm sound in
the following cases:
z
Any door is unlocked when the
intelligent key access function is
not used.
z
The power supply is turned on
when the intelligent key starting
function is not used.
Disable Anti-theft System
You can use the following means to
disable anti-theft alarm:
z
Unlock doors with remote control.
z
Unlock doors with microswitch.
Start Engine
Before Starting Engine
1. Check the environment around the
car before getting in.
2. Adjust seat position, seatback angle,
seat cushion height, head
protection device height, steering
wheel angle and height.
3. Adjust interior and exterior
rear-view mirror.
4. Make sure all doors are closed.
5. Fasten seat belts.
How to Start Engine
(a) Before Staring Engine
1. Apply parking brake firmly.
2. Shut down all unwanted lights and
electrical devices.
3. AT: Shift gear shifting lever to P or N
gear.
MT: shift gear shifting lever to Neutral
gear.
4. Step brake pedal or clutch pedal to
the bottom.
Note
Each starting attempt shall be
no more than 5 seconds, or it
will cause overheating of engine
or wires.
Do not let cold engine run at
high speed.
Check the engine immediately if
it has difficulty in starting or
stalls frequently.
(b) Start Engine
Button Starting Function
When an intelligent key is in the car,
press “ENGINE START STOP” switch to
start engine.
Before starting, you shall follow
instructions in “
(a) Before Staring
Engine
”.
Normal Starting Steps
The engine can be started only when an
intelligent key is in the car.
When stepping on brake pedal or clutch
pedal, indicator on the “ENGINE START
STOP” switch will turn green. Press
“ENGINE START STOP” switch slowly
to start the engine.
If Engine Stalls
Restart the engine in the normal starting
procedure.
Note
When there is grease on your
hands, do not touch “ENGINE
START STOP” switch.
Warning
When
“ENGINE START STOP”
switch fails in operation, stop
operating it immediately and contact
BYD service station.
