BYD G3 AUTO Owner’s Manual
101
4. Connect wires in order of a, b, c, d:
a. Connect the clamp of anode (red)
jump starting wire to anode terminal
(“+”) of the depleted battery.
b. Connect another clamp of anode
(red) starting wire to anode terminal
(“+”) of the charging battery.
c. Connect the clamp of cathode
(black) starting wire to cathode
terminal (“-”) of the charging battery.
d. Connect the another clamp of
cathode (black) starting wire to a solid,
fixed, unpainted metal fixation point
on the car with depleted battery.
Joint point is shown in the figure below:
Connection for Jump Starting
For jump starting connection, please do
not leave the starting wire within action
range of any moving part.
Tips
To avoid personal injury, while
connecting, please do not lean
against the battery or, by
accident, make the starting wire
or clamp touch any object except
the appointed battery terminal or
ground point.
5. Start the engine in normal way, and
then step lightly on the accelerator pedal
to keep the engine running for several
minutes at the speed of 2000rpm.
Depleted battery
Charging
battery
Anode
terminal (“+”)
Jumper cable
Anode
terminal (“+”)
Depleted
battery
Cathode
terminal (“-”)
Charging
battery
Jumper cable
