BYD G3 AUTO Owner’s Manual
91
Before Starting Engine
1.
Check the environment around the
car before getting in.
2.
Adjust seat position, seatback angle,
seat height, head protection device
height, steering wheel angle and
height.
3.
Adjust interior and exterior rear-view
mirror.
4.
Lock up all doors.
5.
Fasten seat belts.
How to Start Engine
(a) Before Staring Engine
MT:
1.
Check parking brake.
2.
Shut down all unwanted lights and
electrical devices.
3.
Shift gear shifting lever to neutral
gear.
4.
Step clutch pedal to the bottom and
maintain until the car moves.
5.
Anti-theft function will be disabled.
CVT:
1.
Apply parking brake firmly.
2.
Shut down all unwanted lights and
electrical devices.
3.
Shift gear shifting lever to P gear. If
you need to restart engine in driving,
please shift gear shifting lever to N;
when the lever is on any other gears,
starting protection device will prohibit
starter running.
4.
Step brake pedal to the bottom and
maintain until the car moves.
(b) Start Engine
Make sure procedure in “ (a)
Before
Staring Engine” is performed before
starting engine.
Normal Starting
Multi-point fuel injection system in the
engine automatically controls
appropriate mixing of air / fuel for
starting. You can perform cold starting
or hot starting in the following
procedure:
Turn ignition switch to START to start
the engine.
The engine can warm up through travel
rather than running idle. Run the engine
stably for preheating until the engine
coolant temperature rises up to normal
range.
If Engine Stalls
Restart as per normal starting
procedure.
When Engine Cannot Start
Refer to “
When Engine Cannot Start
” in
Chapter 4.
