Burstner CityCar 2016, Instruction Manual

Page: 96 / 150

96
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Appliances
9
Switching on:
„
Open the regulator tap on the gas bottle and the gas isolator tap "Refriger-
ator".
„
Set the energy selector switch (Fig. 64,1) to " ".
„
Press the control knob (Fig. 64,2), turn it to the highest level and hold it
down. Wait until gas gets into the burner.
„
Press the gas ignition button (Fig. 64,3) and keep it pressed. Ignition will
take place automatically.
„
Keep gas ignition button (Fig. 64,3) pressed down until the flame indicator
(Fig. 64,4) becomes green and then release it.
„
Keep the control knob (Fig. 64,2) pressed for another 10 to 15 seconds,
then release it.
„
Adjust the refrigerating temperature with the control knob.
Switching off:
„
Set energy selector switch to " ". Refrigerator is switched off.
„
Close the gas isolator tap "Refrigerator" and the regulator tap on the gas
bottle.
Electrical operation
The refrigerator can be operated with the following voltages:
z
230 V AC
z
12 V DC
Switching the 230 V
operation on:
„
Set the energy selector switch (Fig. 64,1) to " ".
„
Use the control knob (Fig. 64,2) to adjust the refrigerating temperature.
Switching the 230 V
operation off:
„
Set energy selector switch to " ". Refrigerator is switched off.
Switching the 12 V
operation on:
„
Set the energy selector switch (Fig. 64,1) to " ".
„
Use the control knob (Fig. 64,2) to adjust the refrigerating temperature.
Switching the 12 V
operation off:
„
Set energy selector switch to " ". Refrigerator is switched off.
Fig. 64 Operating controls for the
refrigerator (Dometic RMS)
1 Energy selector switch
2 Control knob for setting the tempera-
ture
3 Gas ignition button
4 Flame indicator
Z
Close the gas isolator tap "Refrigerator" when the refrigerator is operated
electrically.