Burstner CityCar 2016, Instruction Manual

Page: 101 / 150

101
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Sanitary fittings
10
„
Close the safety/drainage valve (Fig. 68). Turn the knob (Fig. 68,1) perpen-
dicular to the safety/drainage valve and push the push button (Fig. 68,2) in.
If the temperature is below 6 °C, the safety/drainage valve cannot be
closed.
„
Close all drain cocks (Fig. 69 or Fig. 70).
„
Close all water taps.
„
Close drainage opening on the water tank.
„
Open the drinking water filler neck on the outside of the vehicle.
„
Fill the water tank with drinking water. Use a water hose, a water canister
with a funnel or similar for filling.
„
Set all the water taps to "Hot" and open them. The water pump is turned
on. The warm water pipes are filled with water.
„
Keep the water taps open until the water flowing out of the water taps has
no bubbles in it. This is the only way to ensure that the boiler is full of water.
„
Set all water taps to "Cold" and leave them open. This will fill the cold water
pipes with water.
„
Keep the water taps open until the water flowing out of the water taps has
no bubbles in it.
„
Close all water taps.
„
Close drinking water filler neck.
„
Check that the cap on the water tank is not leaking.
10.2.3 Topping up the water
Fig. 68 Safety/drainage valve
Fig. 69 Drain cock with rocking lever Fig. 70 Drain cock with knob
X
When filling the water tank, observe the maximum permissible gross
weight of the vehicle. Luggage must be reduced accordingly when the
water tank is full.