Burstner CityCar 2016, Instruction Manual

Page: 115 / 150

115
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Care
11
Removing fingerprints:
„
Clean the stainless steel surface with a soft cleaning cloth and soapy water
or a glass cleaning agent.
„
Rinse the stainless steel surface and dry it with household wipes.
Removing coffee or tea
stains:
„
Treat the stainless steel surface with a baking soda solution. Allow the
baking soda solution to work in for 15 minutes.
„
Rinse the stainless steel surface and dry it with household wipes.
Removing rust stains:
„
Clean the stainless steel surface with an ordinary household sponge and
with cleanser. If necessary, use a soft cleaning cloth and stainless steel
cleaner.
„
Rinse the stainless steel surface and dry it with household wipes.
11.3.3 Refrigerator
„
Clean the exterior and interior of the refrigerator with a soft cloth and luke-
warm water (containing a mild cleaning agent).
„
Then, wash the refrigerator out with clear water and let it dry.
„
Keep the defrosted water drain channel free of sediments.
„
To prevent material changes, do not use any soap, nor any sharp, granular
or soda containing cleaning agents.
„
Keep oil and grease away from the door seal.
11.4 Cushions
The care and cleaning instructions below are for assistance only. They are not
a guarantee of successful cleaning. These instructions cannot form the basis
for any warranty claims.
Z
If possible, treat stains immediately.
Z
Never use household cleaners to remove marks (e.g. detergents).
Z
Before treating marks, test the cleaning on a hidden part of the upholstery
covers. This will show you whether the cleaning will damage the materials
or dyes.
Z
Always only dab moist or greasy marks, never rub them. It is most effective
to gently press an absorbent cloth or a sponge onto the mark.
Z
Do not wash upholstery.
Z
When cleaning leather covers, make sure that the leather is not soaked
through and that no water seeps through the seams of the leather covers.
Z
Treat the mark from the outside working inwards. This prevents the mark
from spreading.
Z
In the case of both solid or softer contamination, first remove the coarse
parts. Next, carefully scrape off the mark with a blunt knife or spatula.
Z
If the mark has already dried in, carefully brush off the coarse parts. Next,
dab off the mark with a damp cloth or sponge.
Z
The upholstery will fade over time, if it is exposed to sunlight. If the temper-
ature within the vehicle rises rapidly as well, the colour will change at an
accelerated rate.
Therefore, we recommend to close the shades on the windows when there
is strong sunlight. Ensure that heat does not build up when you close the
blind.