Burstner CityCar 2016, Instruction Manual

Page: 124 / 150

124
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Customer service and maintenance
12
12.3 Replacing bulbs, external
The exterior lighting is part of the base vehicle. Replacement of light bulbs is
described in the instruction manual of the base vehicle.
The rear lights are not directly accessible. Fittings must be removed first so
that the bulbs can be replaced.
Replacing left hand bulb
(C 600):
„
Remove the cover (Fig. 83,1). The cover is fixed with cross-head screws.
The cover is located in the gas bottle compartment.
„
Change the bulb.
Replacing left hand bulb
(C 640):
„
Remove the cover (Fig. 84,1). The cover is fixed with cross-head screws.
„
Grip cover (Fig. 84,2) at the grip hole and take it out.
„
Change the bulb.
Replacing right hand bulb:
„
Remove the cover (Fig. 85,1). The cover is fixed with cross-head screws.
The cover is located in the gas bottle compartment.
„
Change the bulb.
X
Bulbs and light fittings can be extremely hot. Therefore, allow lights to
cool down before changing bulbs.
X
Store bulbs in a safe place inaccessible to children.
X
Do not use any bulb that has been dropped or which shows scratches in
its glass. The bulb might burst.
Z
A new bulb should not be touched with the fingers. Use a cloth when
installing the new bulb.
Z
Only use bulbs of the same type and with the correct wattage.
Z
If LEDs in lights are defect, contact an authorised dealer or service centre.
Fig. 83 Access to left hand rear lights
(C 600)
Fig. 84 Access to left hand rear lights
(C 640)
Fig. 85 Access to right hand rear lights