Burstner CityCar 2016, Instruction Manual

Page: 105 / 150

105
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Sanitary fittings
10
„
After the waste water has drained off: Close the drain cock again. To do
this, turn the square spanner (Fig. 76,3) a quarter turn clockwise.
„
Remove the square spanner (Fig. 76,3) and store it.
„
If present, remove and store the waste water hose.
10.3.1 Electric waste water pipe heating
Switching on:
„
Connect the vehicle to the 230 V power supply.
„
Set rocker switch (Fig. 77,1) to the "I" position.
The indicator lamp (Fig. 77,2) on the switch is illuminated.
Switching off:
„
Set rocker switch (Fig. 77,1) to the "0" position.
The indicator lamp (Fig. 77,2) on the switch goes off.
Position The switch is accessible through an external flap on the left-hand side of the
vehicle.
10.4 Toilet compartment
Z
The electric waste water pipe heating only operates if the vehicle is con-
nected to the 230 V power supply.
Fig. 77 Switch for electrical waste
water pipe heating
Z
Do not transport any loads in the shower tray. The shower tray or other
items of equipment in the toilet compartment can be damaged.
Z
For ventilation purposes during or after a shower, and for drying wet
clothing, close the toilet compartment door and open the window or the
toilet compartment skylight. This improves the air circulation.
Z
Use the shower handset for showers. To do so, pull out the shower
handset.
Z
Close the shower curtain completely when showering, so that no water is
able to enter the area between the wash room wall and the shower tray.
Z
After taking a shower, rinse soap residue from the shower tray, otherwise
cracks can appear in the shower tray over time.
Z
After using the shower, wipe it dry to prevent moisture from collecting.
Z
Further information about cleaning the toilet compartment can be found in
the section 11.2.