background image

24

City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN

Before the journey

3

Calculating axle loads:

„

Multiply the distance between storage space and front axle (A) with the 
weight of the load in the storage space (G) and divide the result by the 
wheelbase (R). The result is the weight of the load in the storage space on 
the rear axle. Make a note of this weight and of the storage space.

„

In a second step, subtract the weight in the storage space (G) from the 
weight calculated beforehand. If the result is a 

positive

 value (example 1), 

this means that the load on the front axle is 

reduced

 by this value. If the 

result is a 

negative

 value (example 2), this means that the load on the front 

axle is 

increased

. Make a note of this value, too.

„

Calculate all storage spaces of the vehicle in the same way.

„

In a last step, add all weights calculated for the rear axle to the rear axle 
load and add (or subtract) all weights calculated for the front axle to (from) 
the front axle load.
How to determine rear axle load and front axle load is described in 
section 3.2.2.

If the calculated value exceeds the permissible axle load, the load must be dis-
tributed in a different way.
If the load on the front axle is too low, the grip of the tyres on the road is 
reduced (traction). This applies in particular to vehicles with front-wheel drive. 
In this case, the load must be redistributed, too.

3.2.4

Roof load

Z

Measure the external distances horizontally from the centre of the front 
wheel to the centre of the storage space or to the centre of the back wheel.

Example 1

Example 2

Example calculation

Distance to the front axle

A

(A1) 450 (cm)

(A2) 250 (cm)

Weight in the storage space

G

x 100 (kg)

x 50 (kg)

Wheelbase of the vehicle

R

÷ 325 (cm)

÷ 325 (cm)

Load on the rear axle
(add to the axle load)

138.5 (kg)

38.5 (kg)

Weight in the storage space

- 100 (kg)

- 50 (kg)

Load relief to the front axle
(subtract from the axle load)

38.5 (kg)

Load on the front axle
(add to the axle load)

-11.5 (kg)

X

Do not climb onto the roof. Only use a ladder to climb up if a roof rail is 
fitted.

X

Take care when stepping onto the ladder. There is danger of slipping 
when the ladder is moist or icy.

X

Do not overload the roof. Road behaviour and brake reaction deteriorate 
as the roof load increases.

Summary of Contents for CityCar 2016























































































































































Reviews:

Related manuals for CityCar 2016