Burstner CityCar 2016, Instruction Manual

Page: 114 / 150

114
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Care
11
11.3 Kitchen installation
11.3.1 General notes on care
„
Never clean the sink or the gas cooker with a scourer. Avoid anything which
may cause scratching or grooves.
„
The surface of the kitchen worktop is not scratch proof. When working with
sharp objects, always use a pad. Only use soft cleaning agents for cleaning
and care. Do not use any abrasive or scratching intensive treatment prod-
ucts nor scratching sponges.
„
Clean the sink cover manually using water and washing-up liquid. Do not
clean the sink cover in the dishwasher
„
Clean the burners on the gas cooker using a damp cloth only. Prevent any
water from penetrating the burner covers. Water may damage the burners
on the gas cooker.
„
Clean the surface of the cooker, and particularly the hob, with warm water
and some washing-up liquid. Scouring agent or sharp objects damage the
surface of the hob.
The surface of the hob is easier to clean when it is still slightly warm. Before
cleaning, ensure that the hob is only still warm to the touch (residual heat
indicator has gone out).
Always clean the hob before using it again.
„
When cleaning the burner ring, ensure that the holes are not obstructed.
„
The knobs can be pulled off for cleaning.
„
Clean the external surfaces of the kitchen installation with a wet cloth
without abrasive, corrosive or chloride containing cleaning agents. Do not
use steel wool.
„
Immediately remove acidic or alkaline substances (vinegar, salt, lemon
juice, etc.).
11.3.2 Stainless steel surfaces
Removing scratches from
the surface:
„
Treat the stainless steel surface with a soft cleaning cloth and with a special
stainless steel cleaner.
„
Rinse the stainless steel surface and dry it with household wipes.
Removing stubborn dirt and
burnt-in fat:
„
Clean the stainless steel surface with an ordinary household sponge and
with cleanser.
„
Rinse the stainless steel surface and dry it with household wipes.
Z
Do not clean the stainless steel surfaces with bleaching agents, with prod-
ucts that contain chloride or hydrochloric acid, baking powder nor with
silver polish.
Z
Do not use scouring agent nor coarse sponges.
Z
Prior to cleaning, test the suitability of the cleaning product for the surface
on an unobtrusive spot.
Z
Dry the surfaces thoroughly after cleaning to prevent limescale.
Z
In the case of brushed stainless steel surfaces, wipe in a direction of the
grinding.