Burstner CityCar 2016, Instruction Manual

Page: 41 / 150

41
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Pitching the motorhome
5
„
Turn the crank slightly in a clockwise direction to tighten the fabric.
„
Set the support legs to their final height.
„
Remove the crank from the bayonet socket and store it.
„
Clamp the support legs in the brackets on the vehicle (if mounted) or fasten
to the ground using tent pegs.
Retracting the awning:
„
If present, remove guy ropes and tent pegs, or remove the support legs out
of the brackets in the vehicle.
„
Insert the crank in the bayonet socket of the awning ant turn in a clockwise
direction until the awning has been retracted up to approx. 1 m.
„
If necessary, clean the support legs.
„
Open the lock on the support legs. In order to do this, turn the catch lever
downward.
„
Push the lower part of the support legs in completely.
„
Fold both support legs upward into the front bar and let them click into posi-
tion. In order to do this, apply slight outward pressure on the support legs.
„
Continue turning the crank until the awning has been retracted completely.
„
Remove the crank from the bayonet socket and store it.