Burstner CityCar 2016, Instruction Manual

Page: 117 / 150

117
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Care
11
11.5 Water system
11.5.1 Cleaning the water tank
„
Empty the water tank and close the drainage opening.
„
Remove the cap of the water tank.
„
Fill water tank with water and some washing-up liquid (do not use any
scourers).
„
Using a trade standard brush for washing dishes, scrub the water tank until
there is no longer any visible deposit.
„
Scrub also the pump housing.
„
If possible, clean fresh water sensors through the cleaning openings by
hand.
„
Rinse water tank with copious amounts of drinking water.
11.5.2 Cleaning the water pipes
„
Empty the water system.
„
Close all drainage openings and drain cocks.
„
Fill mixture of water and cleaning agent into the water tank. Observe the
manufacturer's instructions regarding the mixing ratio.
„
Open the drain cocks one by one.
„
Leave the drain cocks open until the mixture of water and cleaning agent
has reached the respective drain.
„
Close the drain cocks.
„
Set all the water taps to "Hot" and open them.
„
Leave the water taps open until the mixture of water and cleaning agent
has reached the drain.
„
Set all water taps to "Cold" and open them.
„
Leave the water taps open until the mixture of water and cleaning agent
has reached the drain.
„
Close all water taps.
„
Flush the toilet several times.
„
Allow the cleaning agent to act in accordance with the manufacturer's
instructions.
„
Empty the water system. Collect the mixture of water and cleaning agent
for correct disposal.
„
For rinsing fill the entire water system with drinking water and empty again
several times over.
Z
Only use suitable cleaning agents as sold by the specialist trade.
Z
The cleaning agent must meet national regulations and be approved (if
required).
Z
Collect any emerging mixture of water and cleaning agent for correct dis-
posal.