Burstner CityCar 2016, Instruction Manual

Page: 40 / 150

40
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Pitching the motorhome
5
5.5 Awning
Extending the awning:
„
Insert the crank (Fig. 8,1) in the bayonet socket (Fig. 8,2) of the awning and
turn in an anticlockwise direction.
The awning begins to extend after a few rotations.
„
Continue turning the crank until the awning is extended approx. 1 m.
„
Release the support legs (Fig. 9,4) out of the front bar (Fig. 9,1) applying
slight outward pressure.
„
Hold the lower part of the support legs.
„
Pull out the lower part of the support legs (Fig. 9,3) until reaching the
desired length.
„
Close the lock on the support legs. In order to do this, press the catch lever
(Fig. 9,2) upward.
„
Use the crank to completely extend the awning.
Z
When the support legs are not positioned, extend the awning a maximum
of 1 m.
Z
Retract the awning in strong wind, rain or snow.
Z
In the case of light rain, shorten one of the support legs so that water can
run off.
Z
In case of light wind or rain, anchor the awning with ropes on both sides.
Z
Only retract the awning when the fabric is dry. When the awning must be
retracted while the fabric is still wet: Extend the awning as soon as pos-
sible, in order to dry out the fabric.
Z
Before retracting, remove leaves and coarse dirt from the awning.
Fig. 8 Extend awning
Fig. 9 Position support legs