Burstner CityCar 2016, Instruction Manual

Page: 90 / 150

90
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Appliances
9
9.3.1 Truma boiler
The boiler for water heating is integrated in the heater system and operates on
gas. The boiler is operated with the operating unit.
Analogue operating unit
The boiler is operated exclusively with gas.
The boiler is switched on by turning the rotary switch (Fig. 58,3) on the oper-
ating unit (Fig. 58).
In winter operation "Heater and production of hot water" (Fig. 58,4) the water
in the boiler is automatically heated up when the heater is switched on. If the
heater switches off after the required room temperature has been reached, the
boiler will continue to heat up until the set water temperature has been
reached.
In summer operation (Fig. 58,1) only the water in the boiler is heated up to
either 40 °C or 60 °C. The water is heated to 60 °C in approx. 25 minutes. The
yellow indicator lamp (Fig. 58,5) illuminates during the boiler heating-up
period.
The voltage supply for the boiler cannot be interrupted by an interruption to the
12 V supply on the panel.
Switching on hot water
production:
„
Open the regulator tap on the gas bottle and the gas isolator tap "Heater/
boiler".
„
Set the rotary switch (Fig. 58,3) on the operating unit (Fig. 58) to "Summer
operation" (Fig. 58,1).
The yellow indicator lamp (Fig. 58,5) is illuminated during the heating up
period. When the set water temperature is reached, the period of heating up
is finished and the yellow indicator lamp fades.
Switching off hot water
production:
„
Set the rotary switch (Fig. 58,3) on the operating unit (Fig. 58) to " ".
„
Close the gas isolator tap "Heater/boiler" and the regulator tap on the gas
bottle.
Fig. 58 Operating unit for heater/boiler
1 Summer operation water tempera-
ture 40 °C or 60 °C
2 Green indicator lamp "Operation"
3 Rotary switch
4 Winter operation "Heater and produc-
tion of hot water"
5 Yellow indicator lamp "Boiler heating-
up phase"