Burstner CityCar 2016, Instruction Manual

Page: 63 / 150

63
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Gas system
7
The two indicator lamps on the operating unit indicate the level of the primary
bottle. When the green indicator lamp (Fig. 37,6) is lit, the primary bottle is suf-
ficiently filled. When the red indicator lamp (Fig. 37,5) illuminates, the primary
bottle is empty. In this case, the reserve bottle is used for the gas supply.
Putting into operation:
„
Connect the gas bottles.
„
Use the knob (Fig. 36,1) on the reversing valve to select the gas bottle
which is to be the primary source of gas (primary bottle). Always turn the
knob as far as it will go.
„
Open regulator taps (Fig. 35,2) on the gas bottles.
„
Press the green button of the hose break guard (Fig. 35,1). The green
marking is shown in the inspection window (Fig. 36,2).
Switching on summer/
winter operation:
„
Switch on the DuoControl regulating system at the operating unit (Fig. 37).
To do so, set the rocker switch (Fig. 37,7) to winter operation (Fig. 37,2) or
to summer operation (Fig. 37,4). The yellow defroster indicator lamp
(Fig. 37,1) is lit when winter operation is selected.
Switching off:
„
Set the rocker switch (Fig. 37,7) to the OFF position (Fig. 37,3). The indi-
cator lamps go out.
„
Close regulator taps (Fig. 35,2) on the gas bottles.
Changing gas bottles
If the green indicator lamp (Fig. 37,6) goes out during operation and the red
indicator lamp (Fig. 37,5) lights up, the primary bottle is empty and must be
changed. The red marking is shown in the inspection window (Fig. 36,2). The
reserve bottle continues supplying the gas appliances with gas.
You may also change an empty gas bottle while gas-operated devices are in
operation.
Changing the gas bottle:
„
Turn the knob (Fig. 36,1) a half turn in the direction of the currently used
gas bottle. In this way, this gas bottle is the primary bottle now, and the
empty gas bottle becomes the reserve bottle. The marking in the inspection
window (Fig. 36,2) changes from red to green.
„
Close regulator tap (Fig. 35,2) on the empty gas bottle. Pay attention to the
direction of the arrow.
„
Unscrew the gas tube from the empty gas bottle.
„
Release the fixing belts and remove the empty gas bottle.
„
Place a filled gas bottle in the gas bottle compartment and retain with the
fixing belts.
X
When changing gas bottles, do not smoke or create any open fire.
X
When you have changed the gas bottle, check whether gas escapes at
the connection points and unions. Use a leakage search spray to spray
the relevant connection point or union. These agents are available at the
accessories shop.
Z
If a DuoControl regulating system is installed, changing the gas bottles dif-
fers on some points from changing the gas bottles without DuoControl.