Burstner CityCar 2016, Instruction Manual

Page: 55 / 150

55
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Living
6
The housing can be turned in different directions:
z
To the left and to the right
z
Up and down
Shifting:
„
Grip holder (Fig. 24,1) and turn by approx. 45°.
„
Push spotlight along the rail system to desired position.
Removal:
„
Grip holder (Fig. 24,1) and turn by approx. 90°.
„
Remove spotlight from rail.
The spotlight can be installed in any position into the rails.
6.9 Tables
6.9.1 Suspension table with separable support leg
The suspension table size can be enlarged by swinging out a table top exten-
sion.
Increasing size:
„
Pull the knob (Fig. 25,2) of the lock down and swing out the table top exten-
sion (Fig. 25,1).
Reducing size:
„
Swing the table top extension (Fig. 25,1) under the table top (Fig. 25,6)
until the lock latches in place audibly.
The suspension table's separable support leg enables it to be used as a bed
foundation.
Conversion to bed
foundation:
„
Lift the front of the table top (Fig. 25,6) by approx. 45°.
„
Pull out the lower part of the support leg (Fig. 25,4) down and lay aside.
„
Remove the table top from the upper retainer.
„
Hook the table top at a 45° angle to the supports into the lower retainer
(Fig. 25,3) and place on the floor with the upper part of the support leg
(Fig. 25,5).
Z
The maximum permissible load on the swung-out table top extension is
3 kg.
Fig. 25 Suspension table with sepa-
rable support leg