Burstner CityCar 2016, Instruction Manual

Page: 108 / 150

108
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Sanitary fittings
10
„
Press both push-button locks (Fig. 81,2) simultaneously with your thumb
and open the flap for the sewage tank.
„
Pull the retaining clip (Fig. 82,1) upwards and pull out the sewage tank
(Fig. 82,2).
„
Completely empty the sewage tank at disposal stations that are especially
provided for this purpose.
10.5.3 Winter operation
When the vehicle is being heated, the toilet, the water tank and the sewage
tank are in a frost-protected area. This means that the toilet can also be used
in winter.
If the vehicle is not being heated and there is a risk of frost in the water tank,
drain off the sewage tank and the water pipes. This prevents frost damage.
10.5.4 Temporary lay-up
Laying up the toilet:
„
Empty the water tank.
„
Flush the toilet until no more water runs into the toilet.
„
Empty the sewage tank.
„
Rinse the sewage tank thoroughly.
„
Leave the drainage neck on the sewage tank open.
„
Let the sewage tank dry for as long as possible.
10.6 Position of the drain cocks and safety/drainage valve
Depending on the model, the drain cocks or the safety/drainage valve are
accessible at the following positions:
Z
Actuate the aeration knob on the sewage tank with your thumb to empty it
completely.
Z
Do not use antifreeze. Antifreeze can damage the toilet.
Z
If the toilet is not to be used for an extended period, empty the water tank,
the sewage tank and the water pipes.
Model Position of drain cock Position of safety/drainage
valve
C 600 Under floor trap In the seat box, next to the
boiler
C 640 Under floor trap In the seat box, next to the
boiler