manualshive.com logo in svg

Bürkert 8619 multiCELL WM AC, Operating Instructions Manual

The Bürkert 8619 multiCELL WM AC is a top-quality product designed for accurate measurement and control of fluid process parameters. With its user-friendly interface, it simplifies operations, making it ideal for various applications. You can easily access the comprehensive Operating Instructions Manual for free download on manualshive.com, ensuring a smooth user experience.

Share
Download
background image

Type 8619

7

 

INSTALLATION AND WIRING  ....................................................................................................................................................42

7.1

  Safety instructions  ............................................................................................................................................................42

7.2

  Installation procedure  .....................................................................................................................................................43

7.2.1 

Installing a 8619 multiCELL on an enclosure or electrical cabinet  .......................................43

7.2.2 

Installing a 8619 multiCELL WM on a support  .........................................................................44

7.3

  Electrical wiring  ..................................................................................................................................................................46

7.3.1 

Recommendations for wiring a 8619 multiCELL WM  .............................................................46

7.3.2 

Specifications of the cables and conductors  .............................................................................47

7.3.3 

Wiring the 12...36 V DC electrical supply for a 8619 multiCELL ..........................................48

7.3.4 

Wiring the 12...36 V DC electrical supply for a 8619 multiCELL WM DC ..........................48

7.3.5 

Wiring the 110...240 V AC electrical supply for a 8619 multiCELL WM AC  ....................50

7.3.6 

Supplying an external instrument via a 8619 multiCELL  .........................................................51

7.3.7 

Supplying an external instrument via a 8619 multiCELL WM .................................................51

7.3.8 

Wiring the inputs and outputs on the main board "M0"  ...........................................................52

7.3.9 

Examples of the connection of flowmeters to a 8619 multiCELL  .........................................53

7.3.10 

Examples of the connection of a solenoid valve to a 8619 multiCELL WM  .......................54

7.3.11 

Identifying the pins on the extension modules  ............................................................................55

7.3.12 

Wiring the Industrial Ethernet  .........................................................................................................56

7.3.13 

Connection example of the Ethernet module  .............................................................................57

7.3.14 

Wiring the module "INPUT"  ............................................................................................................58

7.3.15 

An example of the connection of a chlorine sensor type 8232 (order code 

568523 or 568524) to the module "INPUT"  ..............................................................................60

7.3.16 

Example of the connection of a chlorine sensor type 8232 (order code 

565164) to the module "INPUT"  ...................................................................................................61

7.3.17 

Wiring the output module "OUT"....................................................................................................62

7.3.18 

Wiring the "pH/ORP" module  ........................................................................................................63

7.3.19 

Examples of connections to the "pH/ORP" module ...................................................................64

7.3.20 

Wiring the conductivity module "COND"  ....................................................................................66

7.3.21 

Examples of connection to the conductivity module "COND"  ...............................................67

41



English

Summary of Contents for 8619 multiCELL WM AC



































































































































































































Reviews:

No comments

Related manuals for 8619 multiCELL WM AC

H3C WX5500H series User Configuration Manual preview
WX5500H series
Brand: H3C Pages: 57
Hardi HC5500 Quick Manual preview
HC5500
Brand: Hardi Pages: 2
YASKAWA CC-Link Technical Manual preview
CC-Link
Brand: YASKAWA Pages: 64
V2 Phoenix Programming Manual preview
Phoenix
Brand: V2 Pages: 3
DayTronic 3700 Series Instruction Manual preview
3700 Series
Brand: DayTronic Pages: 22
DayTronic System 10 User Manual Book preview
System 10
Brand: DayTronic Pages: 414
u-blox M8 Series Hardware Integration Manual preview
M8 Series
Brand: u-blox Pages: 28
u-blox EVK-NINA-W151 Quick Start preview
EVK-NINA-W151
Brand: u-blox Pages: 2
ValvTechnologies V1 Series Installation And Operations Maintenance Manual preview
V1 Series
Brand: ValvTechnologies Pages: 20
WAREMA Wisotronic Operating Instructions Manual preview
Wisotronic
Brand: WAREMA Pages: 112
WAGO 750-880 Manual preview
750-880
Brand: WAGO Pages: 414
V2 Blitz Manual preview
Blitz
Brand: V2 Pages: 48
IN-COMMAND NCSP35CM Installation And Operation Manual preview
NCSP35CM
Brand: IN-COMMAND Pages: 47
SYCLOPE TRACE'O Manual preview
TRACE'O
Brand: SYCLOPE Pages: 60
BABYTREND Expedition Double Jogger Instruction Manual preview
Expedition Double Jogger
Brand: BABYTREND Pages: 18
Daikin BRC1H81W Installer And User Reference Manual preview
BRC1H81W
Brand: Daikin Pages: 40
Carel EVD mini User Manual preview
EVD mini
Brand: Carel Pages: 36
Handiquilter IN50005 Installation Instructions Manual preview
IN50005
Brand: Handiquilter Pages: 53

Brands by name

Popular brands

Load more brands