Bürkert 8619 multiCELL WM AC, Operating Instructions Manual

Page: 78 / 194

8.5 Entering a numerical value
→
Accessing, for example, the manual calibration function for a conductivity sensor. Refer to section 8.9 to
access the "Calibration" menu.
Calibration
Manual calibration Mx:Conductivity
2 4.294 S/cm
25.01 °C
0.0 0 0
µS/cm
Cond manual calib
Move the decimal point by
pressing to the far
right of the numerical value
and then on until the
decimal point is in the desired
place (the decimal point
moves in a loop)
Increment the selected figure up or down by
pressing or
After confirming the entered
numerical value by pressing
"OK", modify the unit selected by
pressing or
Fig. 47 : Example of entering a numerical value
→
Accessing, for example, the function for simulation of a pH value. Refer to section 8.9 to access the "Tests"
menu.
Tests PV:
Value:
Simul. value PV M1:pH/ORP
ENTERING
pH
T
- 1 .000
pH
Simulation value
Select the character to the far left by pressing
and then allocate the "+" or "-" sign
by pressing .
To exit the "Tests" menu, press the dynamic key, "ABORT"
Fig. 48 : Changing the sign of a numerical value
78
Adjustmentandcommissioning
Type 8619
English