Bürkert 8619 multiCELL WM AC, Operating Instructions Manual

Page: 85 / 194

8.10.6 Loading settings from the memory card
This function is used to load settings from the memory card, initially saved on it.
The device receiving the settings must be identical to the one from which these data originate.
• Check that both devices have the same order code and the same activated software options.
Refer to section 8.9 to access the "Parameters" menu.
This is
when the
device is be-
ing parame-
tered............
....................
This is
when the
device is be-
ing parame-
tered............
....................
System Parameters Load settings M0:MAIN
Mx:
... 1)
1)
The choices offered depend on the modules fitted. See section 8.16 Process inputs or values or process value network.
If an error message is displayed, refer to section 9.3.8.
8.10.7 Restoring the default parameters of the Process level and
the outputs
This function is used to restore (dynamic key "Yes") the default parameters of the Process level and outputs or
keep (dynamic key "No") the current parameters.
Refer to section 8.9 to access the "Parameters" menu.
This is
when the
device is be-
ing parame-
tered............
....................
This is
when the
device is be-
ing parame-
tered............
....................
System Parameters Factory reset M0:MAIN
Mx:
... 1)
1)
The choices offered depend on the modules fitted. See section 8.16 Process inputs or values or process value network.
85
Adjustmentandcommissioning
Type 8619
English