Bürkert 8619 multiCELL WM AC, Operating Instructions Manual

Page: 118 / 194

0V : Enter the value of the previously selected physical parameter (AI1/AI2), which is associated to a 0 V input
voltage. Instead of being entered, the value can be automatically determined using the function "PV calibration" in
the menu "Calibration -> Mx:Inputs -> AI1 or AI2". See section 8.11.8.
2/5/10V : Enter the value of the previously selected physical parameter (AI1/AI2), which is associated to a
2/5/10 V input voltage. Instead of being entered, the value can be automatically determined using the function
"PV calibration" in the menu "Calibration -> Mx:Inputs -> AI1 or AI2". See section 8.11.8.
P1 and P2 are the values of the process variables which are associated to the selected input range.
P
2
P
1
4................................20 mA
0................................................20 mA
0................................................2 V
0................................................10 V
0................................................5 V
Range of the input signal
Process variable
("PV")
Fig. 83 : Configuring an analogue input
FILTER : Choose the level of attenuation for the fluctuations of the current or voltage value. See Fig. 51 : Filtering
curves.
8.10.22 Setting the parameters of the current outputs
Refer to section 8.9 to access the "Parameters" menu.
This is
when the
device is be-
ing parame-
tered............
....................
This is
when the
device is be-
ing parame-
tered............
....................
M0:Outputs AO1/AO2
PV
1)
M1:
M0:MAIN
Mx:
...
4 mA: ENTERING
20 mA: ENTERING
Diag. event None
22 mA
Filter:
Fast
None
Slow
Parameters
Mx:Outputs
1)
The choices offered depend on the modules fitted and/or the options activated. See section 8.10.4 Consulting and/or
activating the available software options and section 8.16 Process inputs or values or process value network.
PV:
Choose the process input associated with the current output.
4 MA : Choose the value of the process input previously selected, associated with a current of 4 mA, for each
current output. See Fig. 84.
20 MA
: Choose the value of the process input previously selected, associated with a current of 20 mA, for each
current output. See Fig. 84.
118
Adjustmentandcommissioning
Type 8619
English