Buell XB9R 2003, Service Manual, Page: 227 / 566

3-36 2003 Buell XB9R: Engine
HOME
24. See Figure 3-50. The feed oil line at the rear of the of the
oil pump should be torqued to 18-20 ft-lbs (24.4-27.1
Nm). When the oil line has been properly torqued, the
orientation of the line should be approximately 7 o’clock.
25. Also torque the return oil line at the top front oil pump fit-
ting to 18-20 ft-lbs (24.4-27.1 Nm). When the oil line has
been properly torqued, the orientation of the line should
also be approximately 7 o’clock.
26. Torque the vent oil line at the gearcase cover to 120-132
in-lbs (13.6-14.9 Nm).
NOTE
When torquing the vent line, verify that the line does not twist
down towards the muffler, but remains horizontal and aligned
with the feed and return lines after torquing.
Figure 3-50. Approximate Seven O’Clock Orientation of Oil Feed Line and Oil Return Line at the Oil Pump
8769a
8767