Buell XB9R 2003, Service Manual, Page: 216 / 566

2003 Buell XB9R: Engine 3-25
HOME
25. Support engine with wide scissors jack.
26. See Figure 3-23. Remove front “V” bracket with oil cooler
from main frame.
a. Remove cable strap securing the remote idle adjust-
ment cable
b. Remove the three cable straps holding regulator wir-
ing harness in order to extend the harness to
remove “V” bracket
c. See Figure 3-24. Unplug regulator harness, (2)
plugs
●
Alternator [46].
●
Voltage regulator [77].
d. Remove front tie-bar from engine.
e. Unbolt “V” bracket from main frame and remove
from left side.
27. See Figure 3-23. Remove center tie-bar from engine.
28. Remove rear tie bar from frame.
29. Loosen rear isolator bolt.
30. Remove front isolator bolt.
31. Remove front isolator mount from engine.
32. See Figure 3-24. Disconnect electrical components:
a. Neutral switch [131].
b. Speedometer sensor [65] (remove tie wrap).
c. Cam position sensor [14].
d. Positive battery cable at starter.
e. Starter solenoid [128].
f. Oil pressure switch [120].
33. Rotate engine down to remove exhaust header.
Figure 3-24. Electrical Connections
1. Neutral switch [131]
2. Speedometer sensor connection [65]
3. Cam position sensor connection [14]
4. Alternator connection [46]
5. Voltage regulator connection [77]
4
1
5
2
3
8717