Heating circuit data
11
Logamatic 4323 - Subject to technical modifications.
46
11.5 Minimum flow temperature
The minimum flow temperature limits the heating curve to a minimum set value.
This function will not be displayed with "Constant" heating systems.
Change value only if necessary.
Call up the service level. "Gen. parameters" is shown as the first main menu.
Turn the rotary selector until the main menu "Heating circ. + no." appears
(here: "Heating circ. 2").
Press "Display" to call up a submenu (here: "Heating system").
The display shows the selected submenu.
Turn the rotary selector until submenu "Minimum Flow temp." appears.
The display shows the selected submenu.
Hold down "Display" and turn the rotary selector until the required value appears
(here: "10°C"). This value sets the temperature below which the flow
temperature must not drop.
The display shows the set value.
Release "Display" to save your input.
Press "Back" to return to the next level up.
+
+
HEAT CIRC. DATA 2
Radiators
Heating system
HEAT CIRC. DATA 2
5°C
Flow temp.
Minimum
+
HEAT CIRC. DATA 2
10°C
Flow temp.
Minimum
Input range
Factory setting
Minimum flow temperature
5 °C – 70 °C
5 °C