Planned Maintenance Procedures
PS
P2.0
F-code
Section
C-code
Version no
T-code
000
OE35
© BT Products
49
Service Manual
1997-10-21
2.9. Hydraulic Reservoir
Check the fluid level in the hydraulic reservoir. The unit
should be fully lowered and filled to the bottom of the fill port.
2.10. Frame Lube
(“Lubrication Chart” on page55)
The pressure type grease fittings (zerk fittings) should be
lubricated with Texas Refineries #880 Crown and Chassis
lubricating grease. The total number of grease fittings
depends on the truck options when built. A truck with a cold-
storage, freezer use, or corrosive environment application
package will have more grease fittings than a standard truck.
Look for flush-type grease fittings on the load wheel axles.
Regular fittings may be found on the transmission mounting
bearing and the mast chain sheave shafts.
2.11. Pivot Points
There are some pivot points and other items that need to be
lubricated but do not have grease fittings. Lubricate these
non-greasable wear points with a drip oil can using 10 wt.
machine oil.
Return
Summary of Contents for OE35
Page 2: ...Return ...
Page 10: ... BT Products 8 Table of Contents Return ...
Page 331: ...Return ...
