![background image](http://html.mh-extra.com/html/bt/oe35/oe35_service-manual_2824391160.webp)
PS
S5.3
5230
001
OE35
Version no
T-code
F-code
Section
C-code
Dash Display
158
Service Manual
1997-12-15
2. Location
The dash display is physically located on the cross member
on the mast upright. The display is viewed through windshield
when platform is in the fully lowered position.
3. Operational Checks
3.1. Checking Hourmeter
1. Turn on the key switch.
2. Push start switch button and hold in.
3. The display is hourmeter LED reading.
3.2. Checking Battery Condition (BDI).
4. Turn on the key switch.
5. Push start switch button and do not hold in.
6. Depress foot brake pedal and hold down.
7. The display is percent of battery discharge.
8. The battery condition is displayed anytime unit is in
the operating mode.
3.3. Checking Status Code (wrench).
9. Turn on the Key switch.
10. Push start switch button and do not hold in.
11. The display is a status code for failure with unit.
Return
Summary of Contents for OE35
Page 2: ...Return ...
Page 10: ... BT Products 8 Table of Contents Return ...
Page 331: ...Return ...