5- 4
Service Guide
LWE180, LWE200, LPE200, LPE240
© BT Europe AB
Preventive maintenance – P2 LPE 240
Maintenance schedule
T-code
Valid from serial number
Date
Order number
660, 661, 662, 497
723984-
2005-05-11
225553-040
1= Connections are tightened for the first time after 80 hours and then
every 1000 hrs/ 12 months.
2= Mounting bolts are tightened after 80 hrs/1 month to 45 Nm.
3= Check for leakage in connection with the first oil change.
4= The oil is changed for the first time after 80 hrs/1 month and then
every 3000 hrs/36 months.
5= The oil is changed and the filter cleaned for the first time after 80 hrs/
1 month and then every 1000 hrs/12 months.
6 = If the truck goes into a refrigerated environment or other harsh envi-
ronment, the point is addressed at more frequent intervals.
When points with higher time intervals are addressed, the points with
shorter time intervals should also be addressed unless otherwise stat-
ed above.
5700
Electronic card
5700.1
Clean the electrical panel
C
5700.2
Check the connectors and cables
T
I
I
5700.3
Check all segments on the display
I
6100.
Hydraulic system
6100.1
Check for leakage from hoses and couplings
I
6100.2
Check for wear to the hoses
I
6100.3
Check the tank
I
6100.4
Check that the oil level is correct
I
6100.5
Change the oil and clean the filter
L
5
L
6600.
Lift cylinders
6600.1
Check for leakage
I
6600.2
Check the mountings
I
6680
PowerTrak
6680.1
Check for any damage, cracks on the Power-
Trak springs
I
6680.2
Grease the ground pressure spring's guides
C/L
I: Inspect, correct and replace if necessary. T: Tighten C: Clean L: Lubricate
M: Measure, correct if necessary
Pos.
no.
Work to carry out
Interval in hours - may vary due to ap-
plication
5
20
80
500
1000
3000
Interval in days/weeks/months - may
vary due to application
1d
1w
1m
6m
12m
36m
